Download Print this page

Epson WorkForce Pro WF-C4310 Start Here page 2

Hide thumbs Also See for WorkForce Pro WF-C4310:

Advertisement

3
WF-C4310: Select your language, date, and time using
the arrow buttons and OK button.
WF-C4810: Select your language, country, date, and time
on the LCD screen.
You can change these settings later using the product's
Note:
control panel. For more information, see the online User's Guide.
3
Install ink cartridges
Keep the ink cartridges out the reach of children and do not
Caution:
drink the ink.
The included initial cartridges are designed for reliable printer
Note:
setup and cannot be used as replacement cartridges or resold. After
setup, the remaining ink is available for printing.
1
WF-C4310: Lift up the printer cover.
WF-C4810: Lift up the scanner unit until it locks into
place.
2
e ink cartridges four or five times, and
Gently shake th
remove them from the packaging.
3
Remove only the yellow tape from each ink cartridge.
Do not touch the areas shown above. Doing so may
Caution:
prevent normal operation and printing.
4
Insert the cartridge in the holder for each color. Press each
cartridge down until it clicks. Make sure all cartridges are
pushed down into place.
5
Lower the scanner unit or printer cover. Ink charging
begins automatically.
Ink charging takes approximately 5 minutes. When you
see a completion message on the product's LCD screen,
charging is complete.
Don't turn off the printer or raise the scanner unit or
Caution:
printer cover while the printer is charging or you'll waste ink.
6
Follow the on-screen instructions to select paper settings.
4
Load paper
See the online User's Guide for information about loading
capacity, available paper types and sizes, loading envelopes,
and using the ADF (WF-C4810).
1
Make sure the product is done charging the ink, and then
lower the control panel, lift the output tray, and pull out the
paper cassette.
2
Slide the side edge guides all the way out and set the
front edge guide to the paper size you are using.
3
Insert paper with the glossy or printable side down.
Make sure the paper is loaded against the front edge
Note:
guide and not sticking out from the end of the cassette.
4
Slide the edge guides against the paper, but not too
tightly.

Advertisement

loading

This manual is also suitable for:

Workforce pro wf-c4810