Hook Up The Antenna And Usb Cable; Optional - Attach The Modem To A Flat Surface - Multitech MultiModem MTCBA-G-U-F4 Quick Start Manual

MultiModem GPRS USB Wireless Modem

Hook up the Antenna and USB Cable

• Antenna.
Connect a suitable antenna to the SMA connector
(see the User Guide for antenna/RF specifications).
• USB Cable.
Connect one end of the USB cable to the modem
and the other end to the PC.
Optional – Attach the Modem to a Flat Surface
The MultiModem is mounted against a flat surface with the mounting
bracket and two mounting screws. Drill the mounting holes at the desired
mounting location. The mounting holes must be separated by 125mm (4
-15/16 inches) center-to-center. Slide the mounting brackets into slot on
the back side of the MultiModem chassis. Attach the MultiModem to the
surface with two mounting screws.
6 Multi-Tech Systems, Inc. Quick Start Guide