Warning - Samsung OfficeServ 7400 Programming Manual

Introduction
When using Auto Record (MMC 752)
Make sure that you are not violating any laws on the use of recording equipment.
Samsung is not responsible for any illegal use of this feature.
Caution
CALL COST (MMC 508)
Changing this value when there is a call in progress may result in an inaccurate
call cost. This MPD facility requires the Meter Pulse Detection version of the trunk
card.
If intending to make changes in MMCs 503, 506, 510, 805, 807 or 816
Do not change the default levels without the assistance of your dealer or Sam-
sung Technical Support.
Compliance with the National Version Standards
For the national version, OfficeServ 7400 is designed to comply with the stan-
dards of the corresponding country. Therefore, if you need to use MMC 812 (Set
Country Code), please consult your dealer for advice.
Samsung Business Communications

WARNING

CAUTION
OfficeServe 7400 Programming Guide
iii