Configuring Wireless Network - D-Link DWM-312W Quick Installation Manual

4g lte wireless m2m router with one module for two sim cards

Hide thumbs Also See for DWM-312W:

Table of Contents

DWM-312W

Configuring Wireless Network

1. On the Wireless Network 2.4 GHz page, in the Network name field,

specify your own name for the wireless network or leave the value

suggested by the router.

2. In the Password field, specify your own password for access to the

wireless network or leave the value suggested by the router (WPS PIN of

the device, see the barcode label).

3. If the router is used as a Wi-Fi client, you can specify the same

parameters of the wireless network as specified for the network to which

you are connecting. To do this, click the USE button (available for the

WISP Repeater mode only).

4. You can restore the parameters of the wireless network specified before

resetting to factory defaults. To do this, click the RESTORE button.

Quick Installation Guide

Table of Contents