Pc With Ethernet Adapter - D-Link DWM-312W Quick Installation Manual

4g lte wireless m2m router with one module for two sim cards

Hide thumbs Also See for DWM-312W:

Table of Contents

DWM-312W

CONNECTING TO PC

PC with Ethernet Adapter

1. Connect an Ethernet cable between the LAN port located on the back

panel of the router and the Ethernet port of your PC.

2. To connect via the built-in LTE modem: insert a SIM card into the slot

labeled SIM A on the front panel of the router with the gold contacts

facing down. If necessary, install a second SIM card into slot labeled

SIM B with the gold contacts facing up.

If you need to connect a SIM card or change it to another one when the

router is powered on, power off the router, insert or change the SIM

card, and power on the router.

3. Connect the power cord to the power connector port on the back panel of

the router, then plug the power adapter into an electrical outlet or power

strip.

Then make sure that your PC is configured to obtain an IP address

automatically (as DHCP client).

Quick Installation Guide

Table of Contents