Table of Contents
Advertisement
MultiModemII Quick Start Guide
Connect the Modem to Your PC
Plug one end of the serial cable into the RS-232 connector on the
modem and plug the other end into a serial port connector on your
computer, such as COM1 or COM2.
Connect the Modem to the Telephone Line (Dialup Connection)
Plug one end of the modular phone cable into the modem's LINE
jack, and the other end into a public switched telephone network
(PSTN) wall jack.
Important:
interchangeable. Do not plug the phone into the LINE jack. Do not
plug the line cable into the PHONE jack.
Note:
Regulatory agencies may impose certain restrictions on
equipment connected to public telephone systems.
Connect the Two-Wire Leased Line
MT5600BA
modem's LINE jack; connect the other end to a leased line wall jack
or terminals.
MT5600BL
modem's LEASED jack; connect the other end to a leased line wall
jack or terminals.
Connect the Four-Wire Leased Line
MT5600BL
the modem's LEASED jack; connect the other end to a four-wire
leased line wall jack or terminals.
Modems with a leased-line jack support the dial backup feature. For
dial backup operation, plug one end of your dialup modular phone
cable into the modem's LINE jack and the other end into a PSTN
wall jack.
Connect the Phone to the Modem (Optional)
For voice-only calls, plug a telephone into the modem's PHONE
jack.
Connect the Modem to the AC Power Outlet
Plug the transformer module into an AC power outlet or power strip.
Plug the transformer module's cable into the modem's POWER jack.
Note:
Use only the transformer module supplied with the modem.
Use of any other module voids the warranty and can damage the
modem.
2
The LINE jack and PHONE jack are not
–
Plug one end of a two-wire phone cable into the
–
Plug one end of a two-wire phone cable into the
Only – Plug one
end of a four-wire phone cable into
Advertisement
Table of Contents
