Clocking Menu; V.35 Port Menu; Set Configurations; Set And Save Configurations - Multitech MultiDSU MTT1DSU User Manual

Clocking Menu

This menu enables you to select the clock timing (Internal, Line, or
External) for the MultiDSU. If you are connecting to a Telco, choose
option 2, "Line." For a back-to-back setup, set one unit for Internal
(option 1) (or External, option 3, if your DTE is providing the 1.544 MHz
clock) and set the other unit for Line (option 2).
Clocking
Enter Selection (-(previous), q(uit), <1>): _

V.35 Port Menu

Selecting option 4 on the Configurations menu displays the V.35 Port
menu in which "Independent" is the default mode for RTS. "Indepen-
dent" means CTS will follow the state of RTS. Toggle it to "Forced" if you
want CTS to stay high as long as the carrier is high, regardless of the
state of RTS.
V.35 Port
Enter Selection (-(previous), q(uit), <1>): _

Set Configurations

The Configurations menu also enables you to "Set" any configuration
changes you have made since last using this command (or since the
unit was last powered On). Selecting option 5 and pressing the ENTER
key displays the line, "Configuration Setting Done" and returns you to
the Configurations menu. If the MultiDSU loses power, these settings
will be lost.

Set and Save Configurations

The Configurations menu also enables you to "Set and Save" Configu-
rations. Selecting option 6 and pressing the ENTER key displays the
line, "Configuration Setting Done" and returns you to the Configurations
1. Internal
2. Line
3. External
1. Force RTS : Independent
33