Settings; Switch Setting - Toshiba BMS-IFBN1280U-E Installation Manual

BN interface
3

Settings

3-1. Switch setting

SW300 Not used
SW301 Test switch
Set all bits to "OFF".
SW302 Test button
Not used during normal operation.
SW100 Uh Line terminator resistor setting switch
Set the Uh Line terminator resistor on the air conditioner side. Set SW100 to "OFF".
SW700 Shutdown function / air-conditioning search mode function button
Use this button to stop BACnet process and network process of the BN interface or to start up in the air-conditioning
search mode. Note that button operation changes depending on how long it is depressed.
Time duration button is depressed
Less than 4 seconds
4 seconds or more
9-EN
Operation
Stop BACnet process and network process of the BN interface.
Starts air-conditioning in the air-conditioning search mode.
Use the air-conditioning search mode to set up equipment data in the indoor
unit.
– 9 –
Installation Manual