IP Wizard Setup
The IP Wizard Setup dialog box guides you through assigning LAN and WAN IP address information.
If the configuration type is set to IP, the IP Wizard will attempt to automatically detect all Firewalls on
your Secure (private) LAN.
10. Change the default IP Address, Mask, and Default Route to the unique parameters for your Secure
(private) LAN connected to the ETHERNET 1 Port.
Follow the onscreen instructions.
Secured LAN (ETHERNET 1) Setup
11. If an Internet (public) LAN is connected to the ETHERNET 2 Port, click the Internet LAN option in
the Select Port window, then either leave the DHCP Client option enabled or disable (uncheck) it
and assign the proper IP Address, Net Mask, and DNS Server addresses for your Internet LAN.
Follow the onscreen instructions and enter a Gateway IP Address, too, if the DHCP function is
disabled.
Internet LAN (ETHERNET 2) Setup
MTPSR1-120
Chapter 3 - Software Loading and Configuration
25