Emerson Rosemount 3051S Manual page 88

Rosemount 3051S Wireless Series
QP Calibration certificate and tamper evident seal
(5)
Q8 Material traceability certification per EN 10204 3.1.B
(5)(12)
QS Certificate of FMEDA Data
Terminal blocks
(13)
T1 Transient terminal block
(14)
T2 Terminal block with WAGO
(14)
T3 Transient terminal block with WAGO spring clamp terminals
Conduit Electrical Connector
(15)
GE M12, 4-pin, Male Connector (eurofast
(15)
GM A size Mini, 4-pin, Male Connector (minifast
Typical Model Number for FF seal:
Typical Model Number for EF seal:
(1) Requires PlantWeb housing and output code F.
(2) Requires PlantWeb housing and output code A. Includes Hardware Adjustments as standard.
(3) Requires Rosemount Engineering Assistant to configure.
(4) Not available with output code F or Housing code 01.
(5) Not available with output code X.
(6) Not available with output codes B and X.
(7) Valid when SuperModule Platform and housing have equivalent approvals.
(8) Requires PlantWeb Housing and Hardware Adjustments option code D1.
(9) Limited availability depending on transmitter type and range. Contact a sales representative for additional information.
(10) Not available with Housing Code 01 or 7J.
(11) Not available with output code F, Housing code 01, or option code DA1.
(12) Not available with Housing Code 01.
(13) Not available with Housing code 00, 01, 5A, or 7J.
(14) Available with output code A and PlantWeb housing only.
(15) Not available with Housing code 00, 01, 5A, or 7J. Available with Intrinsically Safe approvals only. For FM Intrinsically Safe, Non-Incendive approval (option
code I5) or FM FISCO Intrinsically Safe approval (option code IE), install in accordance with Rosemount drawing 03151-1009 to maintain outdoor rating
(NEMA 4X and IP66).
A-24
®
spring clamp terminals
®
)
®
)
3051S2LD 2A A 1A 1 0 2 0 D FF 7 1 DA 0 0
3051S2LD 2A A 1A 1 0 2 0 D EF 7 1 DA 2 0
Reference Manual
00809-0100-4802, Rev BA
August 2007