Usb Keyboard Support; Init Display First; Onboard Fdc Controller - Multitech IPC-623C User Manual

Award BIOS Setup
IDE Primary Master/Slave UDMA
IDE Secondary Master/Slave UDMA
UDMA, also known as Ultra DMA, is a DMA data transfer
protocol that utilizes ATA commands and the ATA bus to allow
DMA commands to transfer data at a maximum burst rate of 33
MB/s. When you select Auto in the four IDE UDMA fields, the
system automatically determines the optimal data transfer rate
for each IDE device.
On-Chip Primary PCI IDE
On-Chip Secondary PCI IDE
This Integrated peripheral controller contains an IDE interface
with support for two IDE channels. Select Enabled to activate
each channel separately.
Onboard PCI SCSI Chip
Select Enabled if your system contains a built-in SCSI
controller.

USB Keyboard Support

Select Enabled if you have a USB Keyboard.

Init Display First

Initialize the AGP video display before initializing any other
display device on the system. Thus the AGP display becomes
the primary display.

Onboard FDC Controller

Select Enabled unless you installed an add-in FDC.
Onboard UART1
Select a logical COM port name and matching address for the
first and second serial ports. Select an address and
corresponding interrupt for the first and second serial ports.
71
CommPlete Series 4000 Server SBC, Model IPC-623C