Create a Packet Filter Rule
1.
Go to the Packet Filter > Packet Filter Rules screen.
2.
Create a rule allowing clients access across the new tunnel.
box when creating a new rule.
Example:
LAN
Any
Any
Accept
3.
Click the Add button.
The rule displays at the bottom of the screen.
4.
Click the Save & Restart button located just under the menu bar. The Save and Restart
screen displays.
Save to Flash Memory
If a connection is established, then the settings have been entered correctly and your basic
configuration is now complete. Now, you must save your settings to the Flash Memory; this
saves the current settings in the flash prom and prevents settings from getting lost at the next
power up.
Restart
This is optional. You do not have to restart the RouteFinder after saving to the flash memory.
Multi-Tech Systems, Inc. RF820/RF830/RF825 Port Forwarding Setup – A Reference Guide
Port Forwarding
Note:
Do not check the Status
6