Sidestand; Ignition Circuit Cut-Off System - Yamaha X MAX CZD300-A Owner's Manual

Instrument and control functions

Sidestand

The sidestand is located on the left
side of the frame. Raise the sidestand
or lower it with your foot while holding
the vehicle upright.
TIP
The built-in sidestand switch is part of
the ignition circuit cut-off system,
which cuts the ignition in certain situa-
tions. (See the following section for an
6 explanation of the ignition circuit cut-
off system.)
WARNING
The vehicle must not be ridden with
the sidestand down, or if the side-
stand cannot be properly moved up
(or does not stay up), otherwise the
sidestand could contact the ground
and distract the operator, resulting
in a possible loss of control.
Yamaha's ignition circuit cut-off
system has been designed to assist
the operator in fulfilling the respon-
sibility of raising the sidestand be-
fore starting off. Therefore, check
EAU15306 this system regularly and have a
Yamaha dealer repair it if it does not
function properly.
EWA10242

Ignition circuit cut-off system

This system prevents engine starts un-
less the sidestand is up. Also, it will
stop the running engine should the
sidestand be lowered.
Periodically check the system via the
following procedure.
TIP
z This check is most reliable if per-
z See pages 4-7 and 6-20 for switch
6-34
formed with a warmed-up engine.
operation information.
EAU80922