Checking The Brake Fluid Level - Yamaha X MAX CZD300-A Owner's Manual

Hide thumbs Also See for X MAX CZD300-A:
Table of Contents

Advertisement

Periodic maintenance and adjustment
The front and rear brake pads must be
checked for wear at the intervals spec-
ified in the periodic maintenance and
lubrication chart. Each brake pad is
provided with a wear indicator, which
allows you to check the brake pad
wear without having to disassemble
the brake. To check the brake pad
wear, check the position of the wear in-
dicator while applying the brake. If a
brake pad has worn to the point that
the wear indicator almost touches the
brake disc, have a Yamaha dealer re-
place the brake pads as a set.
9

Checking the brake fluid level

Before riding, check that the brake fluid
is above the minimum level mark.
TIP
Make sure the reservoir is level with the
ground when checking the fluid level.
Front brake
1. Minimum level mark
9-24
EAU60682
Rear brake
1
1. Minimum level mark
Specified brake fluid:
YAMAHA GENUINE BRAKE FLUID
(DOT 4)
WARNING
Improper maintenance can result in
loss of braking ability. Observe
these precautions:
z Insufficient brake fluid may al-
low air to enter the brake sys-
tem,
reducing
performance.
z Clean the filler cap before re-
moving. Use only DOT 4 brake
fluid from a sealed container.
1
EWA15991
braking

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents