Yamaha X MAX CZD300-A Owner's Manual page 71

2
1. Quick fastener
2. Bolt access cover
2. Remove the windscreen by re-
moving the bolts.
1
1. Bolt
3. Install the windscreen to the high
position by installing the bolts, and
then tighten the bolts to the spec-
ified torque. WARNING! A loose
windscreen could cause an ac-
cident. Be sure to tighten the
screws to the specified torque.
[EWAN0080]
1
1
1. Bolt
Tightening torque:
Windscreen bolt:
7 N·m (0.7 kgf·m, 5.2 lb·ft)
4. Place the bolt access covers, and
1
then install the quick fasteners.
Instrument and control functions
1. Bolt
1
To change the windscreen height to
the low position
1. Remove the bolt access covers by
2. Remove the windscreen by re-
3. Install the windscreen to the low
6-31
removing the quick fasteners.
moving the bolts.
position by installing the bolts, and
then tighten the bolts to the spec-
ified torque. WARNING! A loose
windscreen could cause an ac-
cident. Be sure to tighten the
screws to the specified torque.
[EWAN0080]
1
6