Instructions For The User; Control Panel - Viessmann VITOTRON 100 Installation And Service Instructions Manual

Instructions for the User

Control Panel

The control panel consists of two working areas: the
signaling area and control buttons. The user can select
the following working modes: winter mode (heating mode)
or summer mode (stand-by mode). Utilize the push button
arrows to scroll through the different working parameters
of the electric boiler. The control panel will automatically
switch to main view if no buttons are pressed within 1
minute. After learning the indicators proceed to initial
startup section.
Failures indication
Indicator Status
EEE Message on electronic display
12
Vitotron 100 Electric Boiler Installation/Service
The control panel allows the user to identify flow rate
(GPM),the inlet and outlet operating temperatures and
the Btu/h of the electric boiler at any given time. It will
also aid in identifying any faults, which may occur, by
displaying the fault codes.
Indicators
X 100 Btu/h = British thermal units per hour
psi = Pounds/Square Inch, pressure level
gpm= Gallons/minute or Flow rate
F° = Temperature (Fahrenheit)
Buttons
9= Power
5/6 = Up and down selection
4= Scroll option
Details
Data record error
Parameter out of range or a failed temperature sensor