User's Instructions - Viessmann VITODENS 200 WB2A Installation & Servicing Instructions Manual

5 Commissioning and Testing
5.9 Final Checks
Figure 5/F

5.10 User's Instructions

Upon completion of commissioning and testing, hand the appliance over to the User, with
reference to the following.
a)
Give the Users instructions to the householder and emphasise their
responsibilities under the current edition of the Gas Safety (Installation and
Use) Regulations.
b)
Explain and demonstrate the lighting and shutdown procedures.
c)
Advise the householder on the efficient use of the system, including the use
and adjustment of all system controls for both DHW and CH.
d)
Advise the user of the precautions necessary to prevent damage to the system
and to the building in the event of the system remaining inoperative during
frost conditions.
e)
Explain the function of the boiler safety controls and how to reset them.
Emphasise that if cut-out persists, the boiler should be turned off and the
installer or service engineer consulted.
f)
Stress the importance of an annual service by a registered heating engineer.
NOTE: Should the timer first display a language that is not English press the
button marked 'info' on the timer unit, then each subsequent press of the will
scroll through different languages. When English is located press OK.
Supplied By www.heating spares.co Tel. 0161 620 6677
43