Panasonic KX-FP362BX Service Manual page 49

Code Function
593 Time between CED and 300bps
594 Overseas DIS detection select
595 Receive error limit value set
596 Transmit level set
598 Receiving sensitivity
599 ECM frame size
717 Transmit speed selection
718 Receive speed selection
722 Redial tone detect
731 CPC mode
732 AUTO disconnect cancel time
745 Power ON film feed
763 CNG detect time for friendly
reception
771 T1 timer
774 T4 timer
775 Monitoring of message transfer
784 Voice prompt test
815 Sensor & Vox check
841 Digital SP-phone check
844 Original setting
852 Print test pattern
Set Value Effective
Range
1:75 msec 1~3
2:500 msec
3:1 sec
1:detects at 1, 2
the 1st time
2:detects at
the 2st time
X Number of 001~999
times
X dBm - 15~00
43= -43 dBm 20~48
1:256 byte 1, 2
2:64 byte
1:14400BPS 1~6
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
1:14400BPS 1~6
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
1:ON 2:OFF 1, 2
1:A 2:B 3:OFF 1~3
1:350 ms 1~3
2:1.8 sec
3:OFF
1:ON 2:OFF 1, 2
1:10 sec 1~3
2:20 sec
3:30 sec
1:35 sec 1, 2
2:60 sec
X 100 msec 00~99
1:ON 2:OFF 1, 2
1:NORMAL 1~3
2:LIGHT
3:DARKER
49
Default
1 See Symptom/Countermeasure Table for long
distance and international calls in THE UNIT CAN
COPY, BUT CANNOT EITHER
TRANSMIT/RECEIVE LONG DISTANCE OR
INTERNATIONL COMMUNICATIONS (P.79).
Refer to RECEIVE PROBLEM (P.78) and THE
UNIT CAN COPY, BUT CANNOT EITHER
TRANSMIT/RECEIVE LONG DISTANCE OR
INTERNATIONL COMMUNICATIONS (P.79).
1 See Symptom/Countermeasure Table for long
distance and international calls in THE UNIT CAN
COPY, BUT CANNOT EITHER
TRANSMIT/RECEIVE LONG DISTANCE OR
INTERNATIONL COMMUNICATIONS (P.79).
Refer to SOMETIME THERE IS A TRANSMIT
PROBLEM (P.77) and THE UNIT CAN COPY,
BUT CANNOT EITHER TRANSMIT/RECEIVE
LONG DISTANCE OR INTERNATIONL
COMMUNICATIONS (P.79).
100 Sets the number of acceptable error lines when
the FAX reconstructs the received data. Refer to
RECEIVE PROBLEM (P.78).
10 Selects the FAX transmission level. Refer to
SOMETIME THERE IS A TRANSMIT PROBLEM
(P.77)and RECEIVE PROBLEM (P.78).
40 Used when there is an error problem. Refer to
THE UNIT CAN COPY, BUT CANNOT EITHER
TRANSMIT/RECEIVE LONG DISTANCE OR
INTERNATIONL COMMUNICATIONS (P.79).
1
1 Adjusts the speed to start training during FAX
transmission. Refer to SOMETIME THERE IS A
TRANSMIT PROBLEM (P.77) and THE UNIT
CAN COPY, BUT THE TRANSMISSION AND
RECEPTION IMAGE ARE INCORRECT (P.82).
1 Adjusts the speed to start training during FAX
reception. Refer to RECEIVE PROBLEM (P.78)
and THE UNIT CAN COPY, BUT THE
TRANSMISSION AND RECEPTION IMAGE ARE
INCORRECT (P.82).
1 Sets the tone detection mode after redialing.
1 Sets the CPC signal detection mode from the
converter.
1 "Set to "2" when the auto disconnect circuit
operates and cuts the line."
1 When the power is turned on, the film is wound to
take up any slack.
3 Selects the CNG detection tone of friendly
reception.
1 Sets a higher value when the response from the
other party needs more time during FAX
transmission.
0 Use this function when delay occurs in the line
and communication (ex. Mobile comm) does not
work well.
2 If set to ON a message can be monitored from
this unit´s SP-PHONE when transferring a
message.
You can hear the voice prompt from speaker after
pressing "START" key.
See TEST FUNCTIONS (P.50).
See DIGITAL SPEAKERPHONE (P.107).
1 Use this feature when you need to transmit and
copy a document with very faint writing or very dark
writing.
NORMAL: Used for normal writing.
LIGHT: Used for faint writing.
DARKER: Used for dark writing.
This feature will return to the normal mode after
transmission or copying.
See TEST FUNCTIONS (P.50).
KX-FP362BX
Remarks
----------