System Configuration; Access The Web Configuration Interface - Crestron VX Series Product Manual

System Configuration

The Automate VX system can be configured using its web configuration interface as described in
the sections that follow.
NOTE: Most system configuration can be accomplished by using the
Designer tool. This tool is available on the Crestron website and locally on the Automate
VX system. For more information on using the tool, refer to

Access the Web Configuration Interface

To access the web configuration interface for the Automate VX system, open the Chrome®
browser on the Automate VX system. The web configuration interface loads automatically.
To access the web configuration interface from a different device:
1. Enter the IP address of the Automate VX system with port 3579 appended to the address
(for example, "10.1.10.31:3579")
A login page is displayed.
Login Page
2. Enter the following login credentials:
username: admin
l
password: 1beyond
l
3. Select Login.
Product Manual — Doc. 9324C
Room Designer on page 26
IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B • 68
Intelligent Video Room