Table of Contents
Advertisement
Installation
Use the following procedures to install the Automate VX system.
In the Box
Qty.
1
IV-SAM-VXP-1B, IV-SAM-VXS-1B, or IV-SAM-VXN-1B Automate™ VX Camera Switcher
Additional Items
2
Rail, 20 in. (508 mm)
1
Power Cord, IEC
1
Wi-Fi™ Network Antenna
1
SDI to HDMI® Signal Converter
1
Feet Set, Chassis
IV-SAM-VXS-1B and IV-SAM-VXP-1B Only
1
Mini DisplayPort™ to HDMI (male) Signal Cable
IV-SAM-VXN-1B Only
1
DisplayPort™ to HDMI Female Adapter
IV-SAM-VXP-1B Only
8
Cable, MiniDIN to BNC
8
Ferrite Cable Clamps
Wire the Camera System
To perform basic wiring for the camera system:
1. Designate a number for each PTZ camera in your system.
2. Mount the cameras as described in the appropriate
camera
model.
Product Manual — Doc. 9324C
Description
documentation for your 1 Beyond
IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B • 20
Advertisement
Table of Contents
