ActionTec ScreenBeam Mini 2 SBWD60A User Manual page 22

The Desktop/Tablet mode switching notification does not appear on my
Windows 10 device when I connect my wireless keyboard/mouse to the
ScreenBeam Receiver.
If the notification does not appear, double-click Action Center in the bottom right corner of
the desktop. Click it on or off to switch between Tablet and Desktop mode.
In some instances, I can't connect to the Receiver from WiDi after installing
antivirus software.
Add Intel WiDi to the antivirus-approved whitelist of applications, and then reconnect.
I'm seeing artifacts and experiencing a choppy, juddering video stream.
In noisy Wi-Fi environments, audio and video freezes may be observed while playing video
content, and longer than expected latency may occur when streaming. To ensure you have
an optimal Wi-Fi environment:
If your Receiver is directly plugged into the HDMI port on the back of your HDTV,
•
reconnect the Receiver to the HDTV with the HDMI extension cable provided and
place the Receiver in front of your HDTV and in direct line of sight with your device.
Disconnect and reconnect the Receiver.
•
If the source device is connected to a wireless router, restart the router, or change the
•
wireless channel on your wireless router/AP. Refer to the wireless router's user manual
for more information.
I'm seeing choppiness and brief pauses while watching Internet video on my
Miracast device.
Wireless interference may cause Internet video playback to be choppy. If this occurs, try the
following:
Disconnect the device from the Receiver. Make sure the Internet connection is good
•
and that the video playing on the phone is smooth.
Clear the YouTube cache and try playing the video again.
•
I'm seeing choppiness and brief pauses while watching local video on my
Miracast device.
Wireless interference may cause the video playback to be choppy. If this occurs, try the
following:
Make sure you're in the same room as the Receiver is.
•
Set the media player to use the H/W decoder, if available.
•
Reboot the Miracast device and Receiver and connect again.
•
Avoid moving the Miracast device around too much.
•
Change the wireless channel on your wireless router/access point.
•
21