Safety Information; Exposure To Radio Frequency Signal - Motorola M930 User Manual

Safety Information

IMPORTANT: Read this information before using your wireless
mobile phone.

Exposure to Radio Frequency Signal

Our wireless mobile telephone is a low power radio transmitter
and receiver. When it is ON, it receives and also sends out radio
frequency (RF) signals.
Your Motorola wireless mobile telephone complies with the
following RF energy exposure standards and guidelines:
• United States Federal Communications Commission, Code of
Federal Regulations; 47CFR part 2 sub-part J
• American National Standards Institute (ANSI) / Institute of
Electrical and Electronic Engineers (IEEE) C95. 1-1992
• Institute of Electrical and Electronic Engineers (IEEE) C95.1-
1999 Edition
• International Commission on Non-Ionizing Radiation
Protection (ICNIRP) 1998
• Ministry of Health (Canada) Safety Code 6. Limits of Human
Exposure to Radiofrequency Electromagnetic Fields in the
Frequency Range from 3 kHz to 300 GHz, 1999.
• Australian Communications Authority Radio communications
(Electromagnetic Radiation Human Exposure) Standard, 2003
• ANATEL, Brazil Regulatory Authority, Resolution No. 303 of
July 2, 2002 "Regulation of the limitation of exposure to
electrical, magnetic, and electromagnetic fields in the radio
frequency range between 9KHz and 300 GHz." and
"Attachment to resolution # 303 from July 2, 2002"
The design of your phone complies with these standards when
used as described in this guide.
6 – Safety Information