Markings On The Device; Body Inscription; Material Identification Number; Actuator Nameplate - Samson 3349 Mounting And Operating Instructions

2 Markings on the device

2.1 Body inscription

The details on the valve version are lasered
onto the front and back of the valve body
(see Fig. 2-2). No nameplate is used.
2.2 Material identification
number
The seat and plug of the valves have a mate-
rial number written on them. Specifying this
material number, you can contact us to find
out which material is used.

2.3 Actuator nameplate

See associated actuator documentation.
2.4 Label when an adjustable
packing is installed
An instructional label is affixed to the valve
when an adjustable packing is installed (see
Fig. 2-1).
Fig. 2-1: Label when an adjustable packing is
installed
EB 8048-2 EN
Markings on the device
2-1