Whirlpool WTW5057LW0 Technical Manual page 43

5. Remove three (3) mounting screws.
6. Remove pump assembly by lifting up and away from the tub.
A.
Removing the Drive Belt and Motor
WARNING
Excessive Weight Hazard
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
1. Turn off the water supply to the washer.
2. Use cardboard or padding to lay washer on the front cabinet.
FOR SERVICE TECHNICIAN'S USE ONLY
A A
Drain Pump
3. Remove the two (2) mounting screws followed by pulley cover.
4. To remove the belt, pull out on the belt and turn the splutch pulley until
the belt slides off.
5. Unplug the harness and remove the two (2) mounting bolts. Now you
can remove the motor.
A. Motor Screws
B. Motor Harness (Lower)
A A
B B
43