Whirlpool WTW5010LW Quick Start Manual

OPERATING INSTRUCTIONS
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS, located in
your appliance's Owner's Manual, before operating this appliance.
STEP 1. ADD STEP 2. LOAD CLOTHES
HE DETERGENT
For best results, load garments in loose
heaps evenly around the basket wall.
Designed to use only HE
(High Efficiency)detergents.
NOTE: See ADDING
LAUNDRY PRODUCTS
(below) for more information
on adding HE detergent,
fabric softener, and/or
bleach.
STEP 3. PRESS POWER STEP 4. SELECT THE DESIRED
TO TURN ON THE CYCLE FOR YOUR LOAD*
WASHER
STEP 5. ADJUST CYCLE STEP 6. SELECT ADDITIONAL
SETTINGS, IF DESIRED OPTIONS*
STEP 7. PRESS AND HOLD START/PAUSE TO BEGIN CYCLE
NOTE: Start button must be held for
1 second to start cycle. Once the status
lights are illuminated, release the start
button.
*Not all cycles, settings or options are available with all models.
ADDING LAUNDRY PRODUCTS
IMPORTANT: Using non-HE detergent will likely result in longer cycle
times and reduced rinsing performance. It may also result in component
malfunction and, over time, buildup of mold or mildew. HE detergents
should be low-sudsing and quick-dispersing to produce the right amount
of suds for the best performance.
ADDING HE DETERGENT TO BASKET
Add a measured amount of HE
detergent or single-dose laundry
packets into the basket. If using
oxi-type boosters,
color-safe bleach, or fabric softener
crystals, add to the bottom of
the washer basket before adding
clothes.
NOTE: Follow the manufacturer's instructions to determine the amount of
laundry products to use.
ADDING LIQUID CHLORINE
BLEACH
Do not overfill, dilute, or use more
than 1 cup (236 mL). Do not use color-
safe bleach or oxi products in the same
cycle with liquid chlorine bleach.
ADDING LIQUID FABRIC SOFTENER
If you desire to use liquid fabric softener
with this washer, Whirlpool suggests
using the Downy Ball ® dispenser. Pour a
measured amount of liquid fabric softener
into the Downy Ball dispenser, pull the
®
ring tightly to seal it, and place on top of
load. Follow manufacturer's directions for
correct amount of fabric softener based on
your load size. Then use the Rinse Options
button to select Fabric Softener. The Downy Ball
release the fabric softener at the correct time in the cycle. For questions on
using the Downy Ball dispenser visit www.downy.com.
®
ADDING LIQUID FABRIC SOFTENER MANUALLY
Select the Fabric Softener option on the control panel before starting a cycle.
During the final rinse, wait until the washer has completed filling, press the
Start/Pause button to pause the washer. Lift the lid and add the recommended
amount of liquid fabric softener. Close the lid, press and hold the Start/Pause
button to resume the cycle.
W11428539C
WHIRLPOOL
®
CONTROL PANEL AND FEATURES
*Appearance may vary depending on model.
1
POWER
Press to turn on/off or to stop/cancel a cycle.
2
CYCLE KNOB
Turn knob to select desired cycle.
3
START/PAUSE
Press and hold the Start/Pause button for 1 second until all status lights
are illuminated, then release to start cycle. Press during a cycle to pause
cycle and unlock lid.
NOTE: If machine is spinning it may take longer to unlock lid.
4
CYCLE MODIFIERS (Not all modifiers are available on all cycles)
TEMP
Press to modify the cycle's available temperatures (Tap Cold, Cold, Cool,
Warm, or Hot).
NOTE: Pressing Temp will toggle through available temperature
options. When no lights in the temperature column are illuminated
the selected temperature is Tap Cold.
RINSE OPTIONS
Press to modify the cycle's available rinse options. Press once for Fabric
Softener, twice for Extra Rinse and three times to activate both.
 F ABRIC SOFTENER
Select this option to let the machine know when you have added
liquid fabric softener.
EXTRA RINSE
Select this option to add a second rinse.
CHOOSING THE RIGHT CYCLE
MORE WATER WHEN YOU WANT IT
For detailed installation instruction and maintenance information, winter storage, and transportation tips, please see the Owner's Manual included with your
machine.
For information on any of the following items, a full cycle guide, detailed product dimensions, or for complete instructions for use and installation, please
visit www.whirlpool.com/owners, or in Canada www.whirlpool.ca/owners. This may save you the cost of a service call.
Register Product
dispenser will automatically
®
/™ ©2020 Whirlpool. All rights reserved. Used under license in Canada.
®
QUICK START GUIDE
TOP LOADING WASHING MACHINE
A cycle guide for your washer can be
found online at www.whirlpool.com .
The document will help identify which
cycle to choose for various load types
as well as the default cycle options.
For example we recommend using
the NORMAL cycle with Warm water
for cottons, linens and mixed-garment
loads.
AUTO SENSING AND DEEP WATER
■ The washer will adjust the water level to the optimal
amount for a High Efficiency wash of the detected
load size.
■ Press Deep Water to automatically add more water
to your wash cycle.
■ It is recommended to use BULKY ITEMS cycle with
Deep Water option for loads where maximum water
level is desired.
■ Expect longer cycle times due to extended fill
duration when using the Deep Water option.
ASSISTANCE OR SERVICE AND ADDITIONAL INFORMATION
Schedule Service How To's & FAQ
To speak with a customer service representative or if you have additional questions, call us toll free at
Whirlpool Brand Appliances
Model & Serial Customer eXperience Center
Number Tag
location
Benton Harbor, MI 49022-2692
2
OPTIONS
Press to add or remove options for each cycle. Press once to add a
30 min PreSoak, twice to activate Deep Water and three times for both.
DEEP WATER
Use this option to automatically add more water to your wash cycle.
You can also use this option to reduce the likelihood of white
residue on dark clothing.
30 MIN PRESOAK
Touch to add a 30 minute presoak period to help loosen tough
stains. The washer will fill, pause to soak, and then begin the
selected cycle.
FAUCET
Press to access an instant water stream. Use this feature to pretreat
clothes and other items right in the washer. You can also use this feature
to manually add water to the machine as desired.
NOTE: The washer will drain at the beginning of the cycle if a large
volume of water is detected to ensure the machine can correctly
sense the load size.
NOTE: If the washer detects an out-of-balance condition it may pause
and attempt and re-distribute the load. During this time the Sense and
Wash status indicators will both briefly illuminate.
WARNING: Do not wash water-resistant or water repellant-type clothing.
Failure to closely follow these instructions may result in an abnormal
vibrating and out-of-balance condition that could result in physical injury,
property damage, and/or appliance damage.
PRE-TREATING BEFORE A WASH CYCLE
CLEANING WITH LESS WATER
The washer has been designed and optimized to provide
a thorough cleaning using less water to conserve energy
and resources.
As the washer dampens and moves the load, the level
of the items will settle in the basket. This is normal, and
does not indicate that more items should be added.
IMPORTANT: You will not see a full basket of water as
with older, less efficient washing machines. It is normal
for some of the load to be above the water line.
Manuals & Add Service Plan
Downloads
1-866-698-2538 or in Canada call 1-800-807-6777.
You can write with any questions or concerns at:
533 Benson Road
Please include a daytime phone number in your correspondence.
1
4 3
■ Press the Faucet button once to
turn on and press again to turn off.
■ Faucet will automatically shut off
after 10 minutes or when max
water level is reached.
■ Water will automatically drain if
water level becomes too high.
Water will also drain after 10
minutes if the lid is left open or
3 hours if the lid is left closed.
Parts Accessories
Whirlpool Brand Appliances
Customer eXperience Center
Unit 200-6750 Century Ave
Mississauga, Ontario L5N 0B7
09/20