Whirlpool WTW5057LW0 Technical Manual page 41

Removing the Lid Lock
WARNING
Excessive Weight Hazard
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
1. Turn off water supply to washer.
2. Complete the steps 1-6 from section Removing the Console.
3. Disconnect the Lid Lock connector from the Main Control. (Connector
number varies depending on model features).
4. Feed the Lid Lock harness through the opening in the washer Top Panel.
5. Disconnect push-mount clip from Top Panel.
6. Complete the steps 1-8 from section Lifting the Top Panel.
FOR SERVICE TECHNICIAN'S USE ONLY
7. Remove the Lid Lock harness from the clips on right side of Top Panel
as shown in below figure.
8. Remove the lid lock bezel by pressing the retaining tabs away from the
lock.
9. Remove the Lid Lock from the Top Panel by pressing down on the tab
as shown in below figure.w
A
A. Clips
A
A. Tab
41