Operating Preprogrammed Pads; Variable Time Entry - Amana RC517 Series Owner's Manual

Operating Preprogrammed Pads

1. Open oven door and place food in oven. Display
shows "door".
• Fan and light operate.
2. Close oven door. Display shows "MENU" and
"ITEM" flashes.
• If oven display does not show "ITEM", pads do not
except entries. Open and close oven door or press
STOP/RESET pad to activate pads.
3. Press desired menu pad if different than display.
4. Press QUANTITY pad to increase quantity if greater
than 1.
• Cooking times are calculated automatically.
5. Press desired number pad and oven operates.
• Display shows item selected and heating time
counts down.
• Display shows "POWER" when microwave energy
is present.
6. Oven stops and signal sounds when timing
sequence is finished.
• Display shows "EOC".
7. Open oven door.
Summary of Operating Preprogrammed Pads
1. Open oven door and place food in oven.
2. Close oven door.
3. Press QUANTITY pad if desired quantity is
greater than one.
4. Enter desired item number.
5. At end of cycle, open oven door.

Variable Time Entry

1. Open oven door and place food in oven. Display
shows "door". Fan and light operate.
2. Close oven door. Display shows "MENU" and "ITEM"
flashes.
• If oven display does not show "ITEM", pads do not
except entries. Open and close oven door or press
STOP/RESET pad to activate pads.
3. Press TIME ENTRY pad. Display shows "0000".
4. Press number pads to enter desired cooking time.
5. Press POWER LEVEL pad if power level other than
100 percent is required. Display shows "COOK
LEVEL" and current power level if other than 100
percent power.
6. Press number pad to enter desired power level. For
example, pressing 2 pad is 20 percent power.
7. Press START pad and oven operates. Display shows
"POWER" when microwave energy is present. If
power level other than 100 percent power was
programmed, display shows "COOK LEVEL" and
power level. Display counts down cooking time.
8. Oven stops and signals when timing sequence is
finished. Display shows "EOC".
9. Open oven door and remove food.
Summary of Variable Time Entry
1. Open oven door and place food in oven.
2. Close oven door.
3. Press TIME ENTRY pad.
4. Enter desired cooking time. If 100 percent power
is desired, proceed to step 7.
5. Press POWER LEVEL pad.
6. Enter desired power level.
7. Press START pad.
8. At end of cycle, open oven door.
8