Table of Contents
Advertisement
7-hOn
7.4 Registration and APP Pairing
1. Connect the smartphone to the home WIFI-network you want to connect the
product to.
2. Open the APP.
3. Create the user profi le (or log-in if it is already created previously).
4.
Close the door.
5.
Pairing the appliance following the instructions on the device display.
Note: WIFI network
It is not possible to connect the appliance to a public WIFI-network. It may cause mal-
functions.
Note: Use same WIFI
Connect with your smartphone to the network you want to connect the product to.
7.5 Enable Remote Control
1. Check that the router is switched on and connected to the internet.
2. Load the laundry and close the door.
3.
Select the "Remote" program, the door locks.
4.
Start the cycle using the APP, control panel will be disabled.
5.
Once the cycle has been completed, the door unlocks and the remote control turns off .
6.
After 2 minutes the applinace goes to off mode.
Note: Remote Control expiration
Once the remote control is activated, if the end user doesn't start any cycle from app in
10 minutes, the appliance will go to Networked Delay Start Mode, and keeps remote
control up to 24 hours, then shut off .
7.6 Disable Remote Control
1. To exit remote control while a cycle is running, press START/PAUSE button on the
control panel. The cycle will pause and Remote will blink.
2. If conditions permit, the door will unlock.
3.
To resume the cycle, close the door and press START/PAUSE button. The remote con-
trol will be reactivated and remote will be fi xed.
4.
Control the appliance using the APP.
7.7 End of cycle with Remote Control on
1. At the end of the cycle, the door will unlock and the remote control will deactivate.
2. After 2 minutes the appliance will automatically switch off .
20
EN
Advertisement
Table of Contents
