Table of Contents
Advertisement
2 - Names and functions of parts
2 - 3 Left side
e Input jacks 3/4 (Inputs 3/4)
These analog inputs are balanced XLR jacks.
XLR (1: GND, 2: HOT, 3: COLD)
r MIC/EXT IN jack
Use a stereo mini jack cable to connect this to the line output jack
of an audio device, for example, or an external mic (3.5mm TRS) that
supports plug-in power.
2 - 4 Right side
i ¤/HOLD switch
Slide this switch toward the ¤ icon to turn the unit on and off
(put it into standby). Set it to the HOLD position to activate the hold
function. Neither the touchscreen nor any buttons can be used when
HOLD is active.
Even when HOLD is active, operation is possible using the remote
app (Portacapture Control).
V CAUTION
Before turning the unit on, lower the volumes of connected equip-
ment to their minimum levels.
Failure to do so might cause sudden loud noises, which could harm
hearing or result in other trouble.
2 - 5 Bottom
a Bluetooth adapter connector
Connect an AK-BT1 Bluetooth adapter (sold separately) here.
s PEAK indicator
This lights when the input level exceeds the peak level.
8
TASCAM Portacapture X6
t LINE OUT jack
Use this to connect with the line input jack of an amp or other equip-
ment.
(headphone) jack
y
Connect headphones to this jack.
(headphone/speaker) volume
u
Use this to adjust the volume output from the built-in speaker or the
(headphone) jack.
o USB Type-C port
Use a commercially-available USB cable to connect a computer or
smartphone. (page 19)
When using an AC adapter, connect it to this port. (page 15)
p microSD card slot
Insert microSD cards into this slot.
d REC indicator
This blinks when in recording standby and lights when recording.
Advertisement
Table of Contents
