How To Use The Controller; Powering On And Off; Setting The Temperature Levels - Navien EME501 User Manual

How to Use the Controller

Powering ON and OFF

You can turn the power ON/OFF by pressing the jog button on the controller.
※ Quick press: Power ON
※ Press for 2 seconds: Power OFF
When the product is turned on for the first time after opening, the temperature is set to
Level 1, and for subsequent use, it is automatically set to the previous level of use.
※ For convenience of operation, if the power is on, pressing the jog button in any direction
for 2 seconds will also turn the power off.

Setting the Temperature Levels

Temperature can be adjusted to as many as 8 steps by moving the jog button up/down (+/-).
The queen model has dual temperature heating function that allows you to set the left and
right temperature steps separately.
A high temperature caution symbol is displayed on the screen for safety if you set the temper-
ature level to 4 or higher.
※ Be careful of low-temperature burns when using the product at high temperatures for a long time.
<Queen model>
Setting the left/right temperature level (Queen model only)
By moving the jog button left and right (</>), you can set each temperature level while the
temperature level on the screen is blinking. During setting, the temperature blinks, and if
there is no operation for 3 seconds, the temperature level setting is completed.
※ Select left ('<') or right ('>') to match L/R mark on the controller.
('L' is selected when operate the jog to the left ('<') and 'R' is selected when operate the jog to
the right ('>').
※ In the queen model, heating is terminated when the temperature level of one side is set to 0
by the jog button.
(Unable to set the both sides to level 0 at the same time, and it can be done by turning off the
power.)
12
< 퀸 모델 >
<Single model>
< 싱글 모델 >