Keystone Manual Adjustment; Adjustment Of The Volume - Mitsubishi XD80U User Manual

General Operation

Keystone Manual Adjustment

Use this to adjust for trapezoidal (keystone) distortion of the pro-
jected image. The projector has both an automatic and a manual key-
stone adjustment function. The manual adjustment will be described
here.
Adjustment Method
(1) Press the ( ) buttons of the projector, or the (
tons of the remote control and set the left and right sides so that
they are parallel.
The keystone adjustment display appears when one of the buttons is
pressed.
Press the button.
The dotted lines indicate the proper condition
(2) To exit the display immediately, press the CANCEL button of the
remote control.
The display will close when there has not been an operation in about
10 seconds.
Note:
* Screen examples have been drawn in an exaggerated style for the purpose of description.
* Please note that depending on the projected picture and the projection conditions, it may not be possible to eliminate keystone distortion
completely.
* When the Auto Keystone function is OFF, the keystone adjustment settings will be maintained even when the power has been turned off.
* See "Adjustment of the Projection Screen" on Page E-22 for information about the Auto Keystone function.
See "Auto Keystone" on Page E-46 for information about turning Auto Keystone ON and OFF.
Also see "Keystone" on Page E-46 for information about making manual adjustments using the on-screen menu.

Adjustment of the Volume

This function adjusts the volume of the built-in speaker.
(1) Press the or VOL button to adjust the volume.
The volume adjustment display appears when one of the buttons is
pressed.
The button increases the volume and the
volume.
(2) Press the CANCEL button to immediately close the display.
The display will close when there has not been an operation in about
10 seconds.
Note:
* Adjustment of the volume will not produce any sound unless an image is
being projected.
) KSTN but-
Press the button.
button decreases the
E-27
(1)
SOURCE
(Projector button)
STANDBY
MENU
RGB ENTER
VIDEO CANCEL QUICK
Q
(2)
FREEZE MUTE LAMP MODE AUTO
1 2 3 4
ASPECT
VOL KSTN ZOOM
TIMER
(1)
STANDBY
MENU
ENTER
RGB
VIDEO CANCEL QUICK
Q
FREEZE MUTE LAMP MODE AUTO
1 2 3 4
ASPECT
VOL KSTN ZOOM
TIMER
(1)
AUTO
(2)