Description of the device
4.6 LED display
4.5.5
Terminal blocks (4-pin)
Component
4-pin spring-loaded ter‐
minal block
4.6
LED display
4.6.1
Position
The following figure shows the arrangement of the LEDs using the example of a SCALANCE
XCM332.
A
RM
CM
DM1/DM2
L1/L2
P
Figure 4-5
*
The number of port LEDs depends on the device.
)
4.6.2
"A" LED
LED "A" (alarm LED) indicates the fault status of the device.
32
Description
4-pin spring-loaded terminal block for connect‐
ing the 24 V DC power supply
pack of 5
LED for displaying the alarm status
LED without function
LED without function
LEDs for displaying the display mode
LEDs for displaying the power supply
LEDs for displaying the port status
Arrangement of the LEDs using the example of a SCALANCE XCM332
*)
Equipment Manual, 10/2022, C79000-G8976-C585-02
Article number
6GK5980-1DB10-0AA5
SCALANCE XCH-300/XCM-300