Setting.the.ip.address.of.the.projector - Mitsubishi Electric XD221U Software Manual

Preparation/SetUp (continued)
Setting the IP address of the projector
Before.setting.the.IP.address,.check.that.the.projector.has.been.LAN-networked.and.turn.on.the.main.power.of.the.
projector..
• When.using.multiple.projectors,.connect.and.configure.them.one.by.one..If.you.turn.on.the.powers.of.the.
projectors.that.are.connected.but.not.yet.configured.at.the.same.time,.they.may.not.be.recognized.
1
Start.the.Projector-Control.Device.Installer.
• Select.[Start].-.[All.Programs].-.[Projector].-.[Pro-
jector-Control.Device.Installer].(in.the.case.of.
Windows .XP)..
®
2
Click.the.Search.button.
• Projector.is.recognized.
(Note)
When.projector.isn't.recognized,.check.the.following..
• The.firewall.function.has.been.disabled..(When.it.
has.been.enabled,.search.may.not.be.conducted.).
• The.personal.computer.and.the.projector.are.on.
the.same.network..(For.preventing.unauthorized.
access.)
• More.than.one.Projector-Control.Device.Installer.
isn't.running..
• The.network.adapter.being.used.is.selected.by.the.
Option.setting.of.the.Tool.menu.
3
Select.a.projector.by.clicking.the.line.showing.the.pro-
jector.and.click.the.Assign.IP.button..
4
The.Assign.IP.Address.screen.appears..
• For.automatic.IP.address.setting.by.the.DHCP.server,.go.to.page.6..For.IP.address.setting.without.using.the.
DHCP.server,.go.to.page.7.
EN-5
Click.here