Back Panel Connectors - Gigabyte MS33-AR0 User Manual

1-6

Back Panel Connectors

Serial Port
1
Connect to serial-based mouse or data processing devices.
VGA Port
2
Connect to a monitor device.
3 10GbE LAN Port #2
The Gigabit Ethernet LAN port provides Internet connection at up to 10 Gbps data rate. See the section
below for a description of the states of the LAN port LEDs.
10GbE LAN Port #1
4
The Gigabit Ethernet LAN port provides Internet connection at up to 10 Gbps data rate. See the section
below for a description of the states of the LAN port LEDs.
Server Management LAN Port
5
The LAN port provides Internet connection with data transfer speeds of 10/100/1000Mbps. This port is
the dedicated LAN port for Server Management.
USB 3.2 Gen1 Ports
6
The USB port supports the USB 3.2 specification. Use this port for USB devices such as a USB
keyboard/mouse, USB printer, USB flash drive etc.
ID button with LED
7
When the system identification is active, the ID LED on the front/ back panel glows blue.
LAN and ID Button LEDs
Speed LED Link/Activity LED
LAN Port
• When removing the cable connected to a back panel connector, first remove the cable from your
device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
1
3
2
10GbE LAN LED:
State Description
Yellow On 5Gbps, 2.5Gbps, 1Gbps data rate
Green On 10Gbps data rate
Off 100Mbps data rate
ID button/LED:
State Description
Blue On System identification is active
Off System identification is disabled
Hardware Installation
- 18 -
5
4
6
10/100/1000 LAN LED:
State
Yellow On
Green On
Off
7
Description
1Gbps data rate
100Mbps data rate
10Mbps data rate