Gigabyte MS33-AR0 User Manual page 50

Parameter
NIC Configuration
Blink LEDs
UEFI Driver
Adapter PBA
Device Name
Chip Type
PCI Device ID
PCI Address
Link Status
MAC Address
Virtual MAC Address
Description
Press [Enter] to configure advanced items.
Link Speed
Š
– Default setting is Auto Negotiated.
Wake On LAN
Š
– Enables power on of the system via LAN. Note that configuring
Wake on LAN in the operating system does not change the value of
this setting, but does override the behavior of Wake on LAN in OS
controlled power states.
– Options available: Enabled, Disabled. Default setting is Enabled.
LLDP Agent
Š
– Enable/Disable firmware's LLDP Agent.
– Options available: Enabled, Disabled. Default setting is Enabled
Identifies the physical network port by blinking the associated LED.
Press the numeric keys to adjust desired values (up to 15 seconds).
Displays the technical specifications for the Network Interface Controller.
Displays the technical specifications for the Network Interface Controller.
Displays the technical specifications for the Network Interface Controller.
Displays the technical specifications for the Network Interface Controller.
Displays the technical specifications for the Network Interface Controller.
Displays the technical specifications for the Network Interface Controller.
Displays the technical specifications for the Network Interface Controller.
Displays the technical specifications for the Network Interface Controller.
Displays the technical specifications for the Network Interface Controller.
BIOS Setup
- 50 -