Pch Configuration - Gigabyte MS33-AR0 User Manual

2-3-7 PCH Configuration

Parameter
PCH-IO Configuration
SATA And RST Configuration/
SATA Controller And RST
Configuration
Only appears when HDD sets to RAID Mode.
(Note)
Description
Press [Enter] to configure advanced items.
SATA Configuration
Š
– Enable/Disable SATA controller.
– Options available: Enabled, Disabled. Default setting is Enabled.
SATA Mode Selection
Š
– Configures on chip SATA type.
– AHCI Mode: When set to AHCI, the SATA controller enables its AHCI
functionality. Then the RAID function is disabled and cannot be
access the RAID setup utility at boot time.
– RAID Mode: When set to RAID, the SATA controller enables both its
RAID and AHCI functions. You will be allowed to access the RAID
setup utility at boot time.
– Options available: AHCI, RAID. Default setting is AHCI.
RAID Device ID
(Note)
Š
– Choose RAID Device ID.
– Options available: Client, Alternate, Server. Default setting is Server.
SATA Port 0/1/2/3/4/5/6/7
Š
– The category identifies SATA hard drives that are installed in the
computer. System will automatically detect HDD type.
BIOS Setup
- 67 -