Table of Contents
Advertisement
The IE-V850ES-G1 enables debugging and programming of target devices by connecting several components
and configuring the desired system.
This chapter describes the various components and their connection. Read this chapter when connecting system
components. For the sequence of system configuration, refer to 1.7 Setup.
For the details on software startup, refer to the user's manual of the debugger that is used.
3.1 Connection to Personal Computer
3.1.1 Overview of connection
The IE-V850ES-G1 can use a personal computer (PC-9800 series, or PC/AT compatible) as the host machine.
The connection to each type of personal computer is described below.
(1) Desktop PC
When using a desktop PC, insert the following PC interface board in the external expansion slot of the desktop
PC and connect the computer to the IE-V850ES-G1.
• IE-70000-PCI-IF-A: For PCI bus (can also be used in a PC98-NX series, PC/AT or compatible)
(2) Notebook-type personal computer
When using a notebook-type personal computer, insert the interface card (IE-70000-CD-IF-A: Sold separately) in
the PC card slot of the computer and connect the computer to the IE-V850ES-G1.
3.1.2 Connection procedure
(1) Powering off
Perform connection while the power of each unit is off.
Before connecting, turn off the power of the IE-V850ES-G1 and the PC.
(2) PC interface board setting
When the IE-70000-PCI-IF-A is shipped, an 8-bit connector board is premounted. However, when the IE-
V850ES-G1 is connected, this must be changed to a 32-bit connector board.
The 32-bit connector board is supplied with the IE-70000-PCI-IF-A. For details, refer to the IE-70000-PCI-IF-A
User's Manual.
30
CHAPTER 3 CONNECTION OF COMPONENTS
User's Manual U16313EJ1V0UM
Advertisement
Table of Contents
