(1) Jumpers (JP3 to JP7)
Jumper setting is not required. Do not change the factory settings.
If the user's manual of the emulation board describes the setting of JP3 to JP7 of the IE-V850ES-G1, follow the
setting described in the manual.
(2) Connectors for connecting emulation board (CN1 to CN3)
These connectors are for connecting the emulation board (sold separately).
2.2 Clock Settings
For the operation clock settings of the IE-V850ES-G1, refer to the user's manual of each emulation board.
2.3 CPU Operating Voltage Range
For the CPU operating voltage range, refer to the user's manual of each emulation board.
24
CHAPTER 2 PART NAMES AND FUNCTIONS
Figure 2-4. Part Names and Functions of Board
CN2
˚PD703191
FPGA
JP3
CN1
User's Manual U16313EJ1V0UM
CN3
JP7
JP5
JP4
FPGA
JP6