Mitsubishi WD570U User Manual page 47

Advanced features (continued)
Password lock
This projector provides the password lock function
that is intended to prevent wrong operations by
children and set controlled access for specified users.
If the password lock is enabled, when the projector is
turned on, the startup screen (or splash screen) will
appear and stay on the screen until the password is
entered. When the password is entered, the startup
screen will switch to the regular operation screen.
To set a password:
(See page 21 for menu setting.)
1. Display the Option menu.
2. Press the or button to select Password.
Password
3. Press the ENTER button.
The Password menu appears.
Password
Change Password
Adjust
Select
4. Press the or button to select Change
Password.
5. Press the ENTER button.
appears.
Password
New Password
Adjust
Select
When the password has already been set, the
screen for entering the old password appears
instead. In such a case, enter the old password
using the same operation as in next step and
press the ENTER button. Then the screen for
entering a new password appears.
6. Enter a 4 digit password using the
buttons.
( =1, =2, =3,
To cancel the procedure, press the MENU
button.
7. Press the ENTER button.
8. Press the MENU button to exit the menu.
OK
Password
Off
[ ]
Confirm
Password
Off
[ ]
Confirm
, ,
=4)
To enable or disable password lock:
(See page 21 for menu setting.)
1. Display the Option menu.
2. Press the
3. Press the ENTER button.
The Password menu appears.
4. Press the
5. Press the
6. Press the MENU button to exit the menu.
and
EN-47
or button to select Password.
or button to select Password.
Password
or button to select On or Off.
Off