Table of Contents
Advertisement
These HTTP POST messages can be used by a 3 party software to integrate the GDS371x.
Enable Event
Enables Event Notification feature
Notification
Via Type
Choose which protocol will be used to connect to the logs server (HTTP or HTTPs).
HTTP Method
Choose which HTTP(s) method will be used to send the logs to the server (POST or GET).
HTTP/HTTPs Server
Enter the IP address of domain name for the logs server.
HTTP Server
Configure the username of your HTTP(s) server
Username
HTTP Server
Configure the password of your HTTP(s) server
Password
Specify the template for the event log messages that will be sent to the server, users can use the following variables to
customize the message:
${MAC} : MAC Address
${TYPE} : Event Type
URL Template
${WARNING_MSG} : Event Message
${DATE} : Date & Time
${CARDID} : Card Number
${SIPNUM} : SIP Number
Event Log
Users could check all device logs directly from the GDS web UI under the menu "Maintenance �� Event log".
In order to get logs for a specific date interval, select the Start Time and End Time, then select which Event type you want to check using the
drop-down list, and click on
The following Event Types are included for filtering:
Open Door via Card
Visiting Log
Open Door via PIN
Open Door via DI
Open door by SI
Call Log
rd
Figure 107: Log Manager Page
Table 37 : Log Manager Settings
to display the records.
Advertisement
Table of Contents
