Figure 3-38 Configure an E-Map
3. Drag the cameras, E-Maps or Alarm in/out devices to the target locations on the map. See
Deploying Cameras on E-Map
31,
Deploying Alarm In/out Devices on E-Map
4. Click Done.
Modifying E-Map
Deploying Cameras on E-Map
Cameras can be deployed into an E-Map.
As shown in
Figure
and the following figure is displayed.
Figure 3-39 Deploy Cameras on E-Map
on page 29,
3-38, drag cameras from the Sources list to the target location on E-Map
Deploying Regional Maps on
on page 31.
Settings
E-Map on page
29