HVMV User Manual
E-Map Config
You can import an E-Map or an E-Map folder, deploy cameras, maps and alarm in/out
devices on the map to show the deployment of surveillance devices and alarm in/out devices
in an area.
Adding E-Map
Click
on the Settings pane in
Figure 3-36 E-Map Management
Perform the following steps to configure the E-Map.
1. Import a map or a map folder.
•
Click
Figure 3-37 Import Map
2. Double-click an E-Map image to configure the E-Map. Your cameras, regional maps and
alarm in/out devices will be listed on the left.
28
Figure 3-2
to import a map folder or click
to go to the following interface:
to import a map.