Page 1
ASH VACUUM CLEANER Operation instructions Model No.: CMVC-414 Before operating this appliance, please ensure that you read & understand all the instructions that apply to it, as failure to comply with these instructions may result in personal injury to other person, and also increase the risk of fire of electrical shock. Please ensure that any replacement parts or accessories used with this appliance are correctly and/or securely fitted before use.
ATTENTION!! The equipment complies with the safety regulations required for electrical equipment. Read through the instructions for use before starting up the equipment. Improper use can lead to personal injury and property damage. Users who are not familiar with the instructions, may not operate the equipment. Keep the instructions for use in safe custody.
Page 3
⚫ Do not use the appliance if the filter is not installed! Do not use other filters except the ones (fire prevention filter) attached to the appliance by manufacturer. ⚫ For cold ash only. “Cold ash” is ash cooled down for a sufficient time without any pockets of embers inside.
Use Instructions ⚫ Fit the HEPA filter (8) on the motor base as the picture shows, and buckle the head unit onto the tank. The filter should be taken out and cleaned after every heavy use. ⚫ Connect one end of the metal hose (7), or the aluminum nozzle (10) with the suction port (1) on tank tightly.
Only use accessories and spare parts recommended by the manufacturer. If the equipment fail some day in spite of our quality controls and your maintenance, only have it repaired by an authorized electrician. Correct Disposal of This Product This marking indicates that this product should not be disposed with other household wastes throughout the EU.