Osd(On Screen Display) Functions - Mitsubishi Diamond Pro 91TXM User Manual

4
4

OSD(On Screen Display) FUNCTIONS

NORMAL-MODE
(1) CONTRAST: Adjusts to the desired contrast level.
(2) BRIGHTNESS: Adjusts to the black level of the screen.
(3) CONNECTOR-SELECT: Selects the video input connection to be used.
(4) H-SIZE (Horizontal Size): Controls the horizontal size of the image on the screen.
(5) H-PHASE (Horizontal Position):
Controls the horizontal position of the image on the screen.
(6) V-SIZE (Vertical Size): Controls the vertical size of the image on the screen.
(7) V-POSITION (Vertical Position): Controls the vertical position of the image on the screen.
(8) PCC-AMP (Pincushion or Bow Amplitude):
Straightens the left and right sides of the screen image.
(9) PCC-PHASE: Adjusts the parallelism of the left and right sides of the screen image.
(10) PIN-BALANCE: Adjusts the curvature of the left and right sides of the screen image.
(11) KEY-BALANCE: Adjusts the vertical slant or tilt of the screen image.
(12) ROTATION: Adjusts the rotation or twist of the picture.
(13) H-STATIC: Adjusts the horizontal alignment of the red, green and blue beams.
(14) COLOR 1-RED, COLOR 2-RED, COLOR 3-RED:
Provides the red-color balances for the display.
(15) COLOR 1-GREEN, COLOR 2-GREEN, COLOR 3-GREEN:
Provides the green-color balances for the display.
(16) COLOR 1-BLUE, COLOR 2-BLUE, COLOR 3-BLUE:
Provides the blue-color balances for the display.
(17) POWER-SAVE (ON/OFF):
When adjusting ON, reduces the power consumption of the monitor when
not in use.
(18) MOIRE-CLEAR (ON/OFF):
When adjusting ON, the moire level on the screen can decreased by the
MOIRE-CLEAR LEVEL.
(19) MOIRE-CLEAR LEVEL:
When MOIRE-CLEAR is on, decreases the moire level on the screen.
ENHANCED-MODE
(20) H-POSI (Horizontal Position): Adjusts the horizontal position of the screen.
(21) CENTER-PCC (Center Pincushion or Bow Amplitude):
Adjusts the pincushioning near the vertical center of the screen.
(22) CORNER-PCC (Top of Pincushion or Bow Amplitude):
Adjusts the pincushioning at the top corners of the screen.
(23) BOTTOM-PCC (Bottom of Pincushion or Bow Amplitude):
Adjusts the pincushioning at the bottom corners of the screen.
(24) TOP-BALANCE: Move the top of the screen image to the right and left.
(25) PCC-SINE: Move the expanded part from top to bottom and bottom to top.
(26) CLAMP PULSE POSITION:
Use this function to eliminate excessive green or white background that
may occur when both Sync-On-Green and external sync signals are
applied to the monitor.
(27) PURITY: Adjusts the purity of the screen.
(28) VIDEO LEVEL: Selects video levels 1.0V or 0.7V.
17