Bosch GCM18V-12SD Operating/Safety Instructions Manual page 34

4. To fasten from front of fence: Attach (each)
auxiliary fence using two (2) 3/16" (M5) flat
head machine screws (Fig. 38). With 3/4"
(19mm) auxiliary fence, use 1-1/2" (38mm)
long screws. Secure behind metal fence with
washer and machine nuts.
To fasten from back of fence: With 3/4"
(19mm) auxiliary fence, use 1/4" (M6) round
head wood screws (3/4"/20mm long). Drill
four pilot holes through auxiliary fence and
run screws from rear of metal fence.
Fig. 39
Right Side
5-1/2"
(140mm)
8-3/8"
1-3/4"
(45mm)
16099221PH GCM18V-12SD OSI 20220506.indd 34
Preparing for Saw Operations
9.5" (240mm)
NOTCH OUT
(213mm)
2-5/8" (67mm)
Tall Auxiliary Wood Fence - 3/4" (19mm) Thick
5. Make a full depth cut to create the blade
slot. Check for interference between the
auxiliary fence (Fig. 38) and the lower blade
guard (Fig. 37, 26). Make adjustments as
necessary.
6. For best splinter-free cuts, use the chop cut
method.
7. When making slide cuts, the center must be
notched out per pattern (Fig. 39).
7" (178mm)
SLIDE CUT
2-1/2" (64mm)
2-5/8" (67mm)
26" (660mm)
-34-
4 mounting holes
Left Side
(213mm)
8-3/8"
1-3/4"
(45mm)
5/6/22 12:15 PM