Gigaset Fusion Manual page 76

Telephony
Use the Web user interface to change and delete call groups.
In Web user interface
Settings
already, they are listed with the following information: Name, internal number, outgoing and
incoming numbers, group members
Add new group:
Select Add Ringing group (
opened Enter a name for the number
For Linear ringing: Select the time (in seconds) to be waited until the call is passed on to the
next group member
into the Active devices area
calls Next . . . The settings for the call group are displayed again
Edit call group:
Delete call group:
Manage connections
To be able to make/receive calls and add keys and widgets to the screen, you need at least one
VoIP account (connection) with an Internet telephony provider. This can be provided by a
provider or PABX. You receive access data for logging in (user name, login name, password etc.)
At least one connection must be assigned to each phone (cordless or corded). Devices may have
different connections for incoming and outgoing calls. Multiple devices can use the same
connection (call group).
You have already set up at least one connection when getting started.
Displaying connections
In display menu
Settings
already been set up are listed with names and connection status
Registered
Not registered
Show connection information:
Device name
Phone number
SIP Username
SIP Password
76
Telephony Phone devices
= selected)
Next . . . The available devices are listed
Next Select the numbers for outgoing and incoming
Click next to the entry
Click next to the entry
Telephony
The connection is successfully registered with a provider or PABX.
The connection is not registered with a provider or PABX.
Tap the entry
Connection name
VoIP account number
User name
The VoIP account password is displayed but masked.
Ringing groups . . . If there are call groups
Next . . . The Ringing group wizard is
Select internal number
Confirm with Yes
Connections . . . The connections that have
Select call behaviour
Drag the required devices
Finish