Gigaset Fusion Manual page 47

LDAP contacts
You can make a company directory in LDAP format available on the phone and in the Web user
interface.
Settings
( = enabled)
Searching for LDAP directory when dialling when there are incoming calls:
Enable/disable name search with the switch (
Access data for the LDAP server
Server address
Server port
LDAP search base
(BaseDN)
Username Password
LDAP via TLS
Filter
Set name and number filters
Use the filters to define criteria to search for specific entries in the LDAP database. A filter consists
of at least one search criterion. A search criterion contains the query for an LDAP attribute.
Example: sn=%
The sn attribute stands for surname. The percent sign (%) is a placeholder for the user entry.
Rules for defining filters:
•
Multiple criteria can be connected using logical AND (&) and/or OR (|) operators.
•
The logical operators "&" and "|" are placed before the search criteria.
•
The search criterion must be placed in brackets and the whole expression must be closed
with a bracket again.
•
AND and OR operations can be combined.
Contacts LDAP contacts
Enter the name to be used to display the directory on the phone
Enter the URL of the LDAP server
Enter the port on the LDAP server at which the database query is
expected, default setting = 389
Set where the search is to start
The LDAP database is hierarchical in design. Use this parameter to
determine what level the search is to start at. Default setting = 0, the
search starts at the top of the LDAP database
Enter the access data for the LDAP server
Select the security process for LDAP data traffic
LDAP data traffic between the phone system and the LDAP server is
transferred via an unsecured connection by default. If you select a
security process, the data traffic is encrypted. You will need to install a
CA certificate signed by the LDAP server on the phone for this.
Setting up more directories
Enable/disable LDAP with the switch
= enabled)
47