Table of Contents
Advertisement
Rinse aid
For best results the rinse aid dosage
can be adjusted.
The dosage can be set between 0 and
6 ml.
The dosage set by default to 3 ml of
rinse aid per program.
– Use a higher setting if spots appear
on dry glassware.
– Use a lower setting if streaking
appears on dishes or glasses.
^ Use the +/- buttons to selected the
desired rinse aid amount and confirm
with OK.
Filter check
This selection allows you to set the
number of cycles run before the filter
check message shows.
You can select between 30 and 60
cycles.
The filter check message is set by
default to 40 cycles.
^ Select the desired number of cycles
and confirm with OK.
See "Cleaning and Care - Triple filter
system" for more information.
Adjust Sensor Wash
The "Sensor Wash" program can be
adjusted to clean stubborn but normal
soiling.
^ Select Yes and confirm with OK .
Settings
!
45
Hide quick links:
Advertisement
Table of Contents
