External Water Softener; Filter Check; Adjust Sensor Wash; Rinse Aid - Miele G 2832 Operating Instructions Manual

Settings
!

External water softener

If the dishwasher is connected to an
external water softener unit which is
regenerated with salt, the water
hardness must still be set in the
dishwasher. Set the dishwasher to the
water hardness of your water softener
unit (see "Before using for the first
time").
^ Set the dishwasher to the water
hardness of the external water
softener and confirm with

Rinse aid

For best results the rinse aid dosage
can be adjusted.
The dosage can be set between 0 and
6 ml.
The dosage set by default to 3 ml of
rinse aid per program.
– Use a higher setting if spots appear
on dry glassware.
– Use a lower setting if streaking
appears on dishes or glasses.
^ Use the
+/-
buttons to selected the
desired rinse aid amount and confirm
OK
with .
44

Filter check

This selection allows you to set the
number of cycles run before the filter
check message shows.
You can select between 30 and 60
cycles.
The filter check message is set by
default to 40 cycles.
^ Select the desired number of cycles
OK
. See "Cleaning and Care - Triple filter
system" for more information.

Adjust Sensor Wash

The "Sensor Wash" program can be
adjusted to clean stubborn but normal
soiling.
^ Select
and confirm with OK.
Yes
and confirm with
OK
.