Frequently Asked Questions; Technical Faults - Miele Excella G2732SCi Operating Instructions Manual

Frequently asked questions

With the aid of the following guide, minor problems can be fixed without a service call.
,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.

Technical faults

Issue
After the dishwasher was
turned on with s, the
display stays off and the
"Start" indicator does not
flash.
The dishwasher stops
during a program.
The buzzer sounds.
The display shows the
following:
Technical fault FXX
Call Technical Service
The buzzer sounds.
The display shows the
following:
Fault
Waterproof F70
Close water faucet
48
Possible fault
The machine is not
plugged in.
The fuse has
tripped.
The fuse has
tripped.
There may be a
technical fault.
The waterproof
system has
activated.
Solution
Insert the plug.
Reset the circuit breaker.
See data plate for minimum
amperage.
Reset the circuit breaker.
See data plate for minimum
amperage.
Turn the dishwasher off s.
After a few seconds:
– Turn the dishwasher on.
– Select the desired program
with the program selection
buttons.
– Press the "Start" button.
If the problem persists, call
Technical Service.
– Turn off the water supply.
– Contact Miele Technical
Service.